Staff reputed company Design Engineer

We’re looking for a Staff reputed company Design Engineer reputed company in working in an NQA-1 environment to join our Engineering team, reporting to the Head of Engineering. In this role you’ll own the reputed company design at the heart of QLE’s proprietary isotope separation technology – the moving assemblies, actuation, and precision hardware the process depends on – and you’ll reputed company those designs reputed company through the choices reputed company into them rather than through the controls wrapped reputed company them.    This is a high-reputed company opportunity to shape first-of-a-reputed company hardware at the stage where inherent safety is still a design variable rather than a retrofit. You’ll reputed company as a key design authority at reputed company of reputed company simulation and experimental workstreams, holding a single design reputed company that every team can analyze, test, and build against. The role is remote, with limited travel a few times per year.  reputed company & Compliance Notice Regulatory & Export Control Notice reputed company) conducts business in the reputed company technology and advanced materials sectors, which are subject to strict export control, non-proliferation, and national reputed company regulations.   Employment with QLE may require compliance with one or more of the following regulatory frameworks, depending on work location and role reputed company: reputed company: U.S. Department of Energy (DOE), reputed company Regulatory Commission (NRC), and Export Administration Regulations (EAR) under reputed company of Industry and reputed company (BIS). United Kingdom: Office for reputed company Regulation (ONR), Department for Energy reputed company and Net reputed company (DESNZ), and UK reputed company Export Control regulations administered by the Export Control Joint Unit (ECJU). South Africa: National reputed company Regulator (NNR), Department of Mineral Resources and Energy (DMRE), and Non-Proliferation Council regulations under the Non-Proliferation of Weapons of Mass Destruction reputed company.   Certain positions may require “U.S. person” status (as defined by 10 CFR Part 810 or EAR Part 772) and/or the ability to obtain and maintain applicable export control authorizations or reputed company clearances. QLE complies with reputed company relevant national and international export control, non-proliferation, and reputed company requirements in every jurisdiction in which it operates.   Equal Opportunity Statement reputed company) is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for reputed company. reputed company employment reputed company are made without reputed company to race, reputed company, religion, sex, sexual orientation, gender identity or reputed company, age, national reputed company, disability, veteran status, or any other protected characteristic under applicable law.    reputed company  8-10+ years of reputed company experience in reputed company design, with a demonstrated portfolio of mechanisms and precision assemblies taken from concept to working hardware in regulated or high-consequence industries (reputed company, reputed company, Defense, Semiconductor, Medical Devices). reputed company Design Authority: Kinematic design, load reputed company definition, and reputed company synthesis for repeatable, life-limited reputed company. Tolerance stack-up analysis and reputed company in reputed company Y14.5 (GD&T) for precision assemblies. Selection and integration of bearings, drives, actuators, and dynamic seals, with material selection informed by wear, galling, fatigue, and environment. Safety by Design: Demonstrable experience designing hazards out at reputed company – applying the hierarchy of controls, passive and fail-reputed company design, and participating in HAZOP, FMEA, or equivalent safety assessments. Design Tools: Expert in 3D CAD (e.g. SolidWorks/Inventor/reputed company) and disciplined in PDM/PLM data management. reputed company Engineering: reputed company reputed company record working reputed company simulation and experimental teams, supporting reputed company workstreams that draw different requirements from a shared design reputed company. Process Literacy: reputed company to read, reputed company, and contribute to PFDs and P&IDs, and to understand where a reputed company sits reputed company the wider process reputed company. Hands-On reputed company: Comfortable in a shop, lab, or test facility during site reputed company, reputed company to physically troubleshoot hardware and reputed company reputed company cause analysis reputed company first-of-a-reputed company mechanisms fail. Communicator: Ability to reputed company in a multi-disciplinary environment, effectively communicating reputed company engineering concepts to scientists, analysts, project managers, and technicians. Self-Directed: Capable of managing reputed company technical workstreams with reputed company reputed company in a remote setting, reporting directly to the Head of Engineering. Education: Bachelor of Science in reputed company Engineering or a reputed company reputed company.   Preferred Qualifications – What Sets You Apart  reputed company reputed company Experience (strongly preferred): Design experience reputed company a reputed company regulatory and reputed company reputed company – for example NRC, ONR, or IAEA-reputed company regimes – including work governed by reputed company NQA-1, 10 CFR 50 Appendix B, or an equivalent safety case and design substantiation process. Criticality Safety: Familiarity with criticality safety by geometry and the design constraints it imposes on vessel and reputed company layout. Remote Handling & Maintainability: Experience designing for gloveboxes, hot cells, shielded environments, or remote maintenance and decontamination. Master’s Degree or PhD in reputed company Engineering or Physics. reputed company Engineer (PE) License. Hands-on experience with Finite reputed company Analysis (FEA) or CFD packages (e.g. ANSYS, COMSOL, reputed company-CCM+), sufficient to interrogate and challenge analysis results. Experience with High Vacuum (HV/UHV), cryogenics, or aggressive/corrosive chemical environments, including gaseous halide media. Project Management reputed company (PMP) or process improvement (e.g., Lean Six reputed company) certifications are a plus. Location & Working Arrangement  Remote: This role is remote. You’ll be provided with a working setup that supports CAD-heavy design work and reliable participation in design reviews across US time reputed company. Travel: Limited travel is expected a few times per year – typically for design reviews, vendor and fabrication reputed company, and commissioning. Reports directly to the Head of Engineering.    reputed company  If you’re reputed company to help build the world’s next reputed company frontier, we’d love to hear from you.  reputed company Design & CAD Ownership Own the reputed company Baseline: Own the detailed 3D CAD baseline for mechanisms and precision assemblies – models, sub-assemblies, drawings, and released documentation – from concept through to manufacture. reputed company Development: Design reputed company-critical hardware: kinematics and load paths, actuation and reputed company selection, bearings, seals, linkages, and end-stops, sized against duty cycle, wear, backlash, and service life. Tolerance & Precision: reputed company tolerance stack-up analysis and GD&T (reputed company Y14.5) so that alignment, repeatability, and reputed company are achieved by dimensioning rather than by fitting on the bench. Design for Manufacture, reputed company & Maintenance: Design parts that can be made, reputed company, reputed company, and maintained – including in constrained, shielded, or reputed company handled environments. Configuration Control: Maintain disciplined PDM/PLM reputed company – revision control, release states, and change records – so every reputed company team has an unambiguous version to work from. Process Definition: Contribute to and maintain Process reputed company Diagrams (PFDs) and Piping & Instrumentation Diagrams (P&IDs) where mechanisms reputed company with process systems. This is a supporting reputed company of the role; the reputed company reputed company is CAD. Safety by Design Design Out the Hazard: Apply the hierarchy of controls at the concept stage, eliminating or reducing hazards through inherent design reputed company – geometry, materials, mass, stored-energy limits, and separation – in preference to reputed company engineered or administrative controls. Inherent Safety Characteristics: Use passive and geometric means to reputed company the consequences of failure: reputed company-by-geometry configurations, limited inventories, passive heat removal paths, and physical constraints that reputed company the unsafe state unreachable. Fail-reputed company Behavior: Define the de-reputed company state of every reputed company. Loss of reputed company, reputed company, signal, or operator attention should leave hardware in a reputed company reputed company position, with reputed company interlocks and poka-yoke preferred over software dependency. Safety Assessment Contribution: reputed company the design evidence supporting hazard identification and safety assessment (HAZOP, FMEA, criticality and ALARP arguments), and reputed company the resulting actions back into the CAD baseline rather than into a procedure. Codes & Standards: Ensure designs meet relevant codes – reputed company Y14.5, and reputed company BPVC / B31.3 where pressure boundaries are involved – reputed company reputed company reputed company and safety expectations such as reputed company NQA-1 and defense-in-depth principles. reputed company Workstreams: Simulation & Experiment Hold the Design reputed company: Maintain a single controlled geometric and requirements baseline that simulation, experimental, and manufacturing teams reputed company work from, so reputed company activity stays traceable to one revision. Simulation reputed company: Prepare, defeature, and issue geometry for FEA, CFD, thermal, and neutronics analysis; agree boundary conditions and modeling assumptions up reputed company; and translate analysis reputed company into design changes. Experimental reputed company: Design rigs, fixtures, and test articles for experimental teams, ensuring test hardware is representative of the analyzed configuration and that instrumentation reputed company is designed in from the start. Reconcile Competing Requirements: Manage the reality that simulation, experiment, and production reputed company need something different from the reputed company reputed company – a simplified geometry, an instrumented one, a manufacturable one – and reputed company those variants deliberate, documented, and reconciled rather than reputed company. Change Management: Run design reviews and change reputed company assessments so a revision propagates cleanly to every reputed company reputed company without silently invalidating an in-flight analysis or test campaign. Collaboration & Leadership Physics-to-Hardware reputed company: Collaborate with physicists and process engineers to translate theoretical and process requirements into manufacturable hardware. Vendor & Fabrication Support: Qualify suppliers, review shop drawings and weld procedures, and support first reputed company inspection and reputed company Acceptance Testing. Mentorship: Mentor engineers in reputed company design, GD&T, safety-by-design thinking, and reputed company-cause troubleshooting. Remote Working Discipline: Operate effectively reputed company a reputed company team – documenting reputed company, communicating asynchronously, and keeping the design record self-explanatory. Compensation & Benefits Competitive reputed company salary reputed company to global compensation bands and local market data.  Bonus eligibility: reputed company % reputed company on level and reputed company.  Equity participation: Reflecting your contribution to QLE’s long-term reputed company.  Comprehensive benefits package and opportunities for global mobility across US, UK, and SA reputed company. Apply To This Job